The quick answer: if your pool chlorine is too high, stop adding chlorine and let it come down. With the cover off and the sun out, an outdoor pool loses about 2–4 ppm of free chlorine a day. If you need it lower sooner, a chlorine reducer (sodium thiosulfate) works in minutes: about 2.4 oz (67 g) lowers free chlorine by 1 ppm in 10,000 gallons. Add it in small steps, retest between them, and follow the product label. Swim once chlorine is back in range and at or below your chlorine label's re-entry level.
How high is "too high"?
"Too high" depends on your stabilizer (CYA). TroubleFreePool's Pool School explains that the higher your CYA, the more free chlorine (FC) you need for the same effect, so 6 ppm can be normal in one pool and high in another.
| CYA (ppm) | FC minimum | FC target | Top of normal range |
|---|---|---|---|
| 0 | 1 | 4 | 6 |
| 30 | 2.3 | 5.3 | 7.3 |
| 50 | 3.8 | 6.8 | 8.8 |
| 70 | 5.3 | 8.3 | 10 |
Two fixed limits apply whatever your CYA:
- Product labels. Many pool chlorine labels say not to reenter a pool above 4 ppm. One EPA-registered sodium hypochlorite label reads: "Do not reenter pool with a chlorine level above 4 ppm". Check the label on the product you use.
- 10 ppm. Some health codes for public pools set this as the maximum. San Bernardino County's environmental health department, for example, says free chlorine "must not exceed 10 ppm while the pool is available for use".
The FC/CYA chart shows the full range for every CYA level, and pool chlorine levels explains what a normal reading looks like.
Check the reading first
High readings are often a testing problem, so retest before you treat:
- The DPD test can bleach out. CDC notes that above 10 ppm the test may partially or totally bleach out and read falsely low or 0 ppm. Taylor Technologies suggests diluting the sample 1:1 with chlorine-free water and multiplying the result by 2.
- Use a drop kit if you can. CDC notes that test strips are less accurate than DPD test kits.
- Free vs total chlorine. Make sure you are reading free chlorine (FC), not total chlorine. More on that below.
Why pool chlorine gets too high
- A shock or SLAM. Shocking raises chlorine far above normal on purpose. See how much shock to add to a pool.
- A dose that was too big. Usually from a "per 10,000 gallons" instruction scaled by eye, or a wrong pool volume. How many gallons is my pool helps you check yours.
- A feeder or salt cell set too high. Tablet feeders and salt chlorine generators keep adding chlorine every day, including on cool, cloudy or covered days when the pool uses less.
- A cover kept on. TroubleFreePool notes that a cover that blocks UV lowers chlorine loss from sunlight, so a covered pool holds its chlorine much longer.
How to lower pool chlorine
Option 1: let it fall (free, slower).
- Stop adding chlorine. Turn a salt cell's output down or remove tablets from the feeder.
- Take the cover off and keep the pump running in daylight.
- Retest each day. From TroubleFreePool's 2–4 ppm a day, a pool a few ppm over target is usually back in range within a day or two of sun.
Option 2: chlorine reducer (fast).
Sodium thiosulfate, sold as chlorine reducer or chlorine neutralizer, removes chlorine within minutes.
- Test FC and decide where you want to stop: just under the top of your normal range, never below your minimum.
- Work out the dose for your volume. For reference, lowering FC by 5 ppm in 10,000 gallons takes about 12 oz (335 g) of sodium thiosulfate crystals (88 g per 10,000 litres for the same 5 ppm).
- Follow the product label. Products differ in form and strength, so the label's rate comes first.
- Add half, spread in front of a return with the pump running, circulate for 30 minutes and retest.
- Add more only if FC is still high. The what will this do calculator shows how far a given amount of chlorine reducer lowers FC in your pool.
Overshooting is the common mistake: it takes FC below your minimum and you have to add chlorine back. Log each dose in Pool Calc for iPhone, and it reminds you when to retest, so a second dose never goes in before the first has mixed.
Pool chlorine too high after shock
If you shocked or are running a SLAM, high chlorine is the point. The shock level is 40% of your CYA, for example 12 ppm at 30 CYA or 20 ppm at 50 CYA. Hold it until the SLAM is finished, then stop adding chlorine and let the sun bring FC down. Don't neutralize a SLAM before it is finished: the high level is what does the work. For the reading to wait for afterward, see how long after shocking a pool you can swim.
Total chlorine too high
Total chlorine (TC) is free chlorine plus combined chlorine (CC): TC − FC = CC. If FC is normal but TC is much higher, the extra is combined chlorine. TroubleFreePool describes CC as a sign that something in the water is still being broken down by the chlorine, and the Pool School says to SLAM the pool when CC is above 0.5 ppm. In that case the fix is more chlorine, not a reducer. If the water is also green, see pool green but chlorine high. For how the two readings differ, see free chlorine vs total chlorine.
Chlorine too high and pH too low
When both show up at once, the pH reading itself may be the problem. Taylor Technologies notes that chlorine above about 10 ppm can turn the phenol red pH test blue or purple instead of yellow-to-red. Add one drop of the chlorine neutralizer from your alkalinity test to the pH sample and retest. If pH is still low once chlorine is back in range, see pool pH too low.
When can you swim?
Swim when free chlorine is back within your normal range and at or below the re-entry level on your chlorine label (many labels say 4 ppm). Never swim during a SLAM or with free chlorine above 10 ppm. Your product label always comes first.
The FC/CYA calculator shows the normal range for your CYA. For questions about how chlorine affects your health, ask your doctor.
Common mistakes
- Neutralizing in one go. Big thiosulfate doses overshoot. Split it and retest.
- Treating a bleached-out test. Dilute the sample and retest before adding anything.
- Lowering FC when CC is the problem. High total chlorine with normal free chlorine needs a SLAM.
- Leaving the feeder or salt cell on high. The level climbs right back.
- Forgetting what went in. Pool Calc keeps every dose and reading in one log, so you can see whether the spike came from a shock, the feeder or a doubled dose.
Track it in Pool Calc
Pool Calc checks your free chlorine against your CYA, works out a chlorine reducer dose and splits it into safe steps, and charts FC so you can see a feeder or salt cell running high before it becomes a problem. Get Pool Calc for iPhone and log your next test.
One pool? Every feature, free. No account, no ads, and iCloud backup is included.
Sources
- TroubleFreePool Pool School: Free Chlorine: outdoor pools lose 2–4 ppm FC a day; chlorine neutralizers contain sodium thiosulfate; a UV-blocking cover lowers chlorine loss; the FC needed depends on CYA.
- TroubleFreePool Pool School: ABC's of Pool Water Chemistry: higher CYA needs more FC; SLAM when CC is above 0.5 ppm.
- CDC: Home Pool and Hot Tub Water Treatment and Testing: DPD tests can bleach out above 10 ppm; test strips are less accurate than DPD kits.
- Taylor Technologies: Why Am I Getting Unusual Test Results?: diluting a bleached-out DPD sample; chlorine over about 10 ppm turns phenol red blue or purple; one drop of chlorine neutralizer fixes the pH sample.
- EPA: sodium hypochlorite solution 12.5% label (PPLS): "Do not reenter pool with a chlorine level above 4 ppm".
- San Bernardino County Environmental Health: How much chlorine should I have in my pool and spa?: free chlorine must not exceed 10 ppm while a public pool is open.
- Every dose on this page comes from the same chemistry engine as Pool Calc.
Safety
- Keep chemicals out of reach of children and pets, and keep them out of the water until it is back in range.
- Never mix chemicals. Never add acid and chlorine together: mixing them releases toxic chlorine gas.
- Add chemicals to water, never water to chemicals.
- Store chemicals sealed, cool and dry, apart from each other.
- Read and follow the product label. It always comes first.